| 62.30.1600.001.21.1504 Standard 5 Slewing Ring Bearings | r1 max.:0.4 mm; Mass needle roller:0.136 g; r2 max.:0.6 mm; r1,2 min.:0.1 mm; Dw:1.5 mm; Lw:9.8 mm; |
| 162.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings | Da (max):256 mm; Configuration:Single Row; Radial Clearance:0.115 to 0.165 mm; Weight:18.700 kg; r1:3 mm; D:270 mm; ra (max):2.5 mm; Static Load Rating:800,000 N; dc (min):184 mm; Fillet Radius/Chamfer:3 mm; db (max):179 mm; Dynamic Load Rating:545,000 N; dd (min):196 mm; Limiting Speed - Oil:2,600 rpm; d:150 mm; db (min):164 mm; B:73 mm; Limiting Speed - Grease:2,000 rpm; Bore Type:Cylindrical Bore; |
| 282.30.1275.013 Type 110/1400.2 Standard 5 Slewing Ring Bearings | R1:58.737 mm; R2:30.163 mm; Pa:10.2 kN; End plug (suffix Y):EPR 12; Cap bolt, SAE grade:5; Mass pillow block:28.1 kg; H2:44.45 mm; ba:38.894 mm; P150°:46.3 kN; N1:25.4 mm; Housing:SAF 520; PG:1/4 NPT; Ca:55.804 mm; P180°:55.6 kN; Cap bolt:2 x 3/4-10 UNC; h:42.069 mm; L:387.35 mm; P120°:50.7 kN; A2:152.797 mm; J max.:333.375 mm; |
| 60.25.1455.575.11.1403 Standard 5 Slewing Ring Bearings | Radial Clearance:0.025 to 0.051 mm; D:95 mm; Limiting Speed - Oil:7,600 rpm; Enclosure:Single Shield with S; Configuration:Single Row; da (min):79 mm; Fillet Radius/Chamfer:0.6 mm; Cy (max):2.5 mm; D1 (max):92.9 mm; Snap Ring Width:1.1 mm; Bore Type:Cylindrical Bore; a (max):1.7 mm; Weight:0.150 kg; Static Load Rating:12,800 N; Factor fo:16.0; r1:0.5 mm; Snap Ring Outside Diameter:99.4 mm; Da (max):91 mm; |
| 92.35.1802.991.41.1502 Standard 5 Slewing Ring Bearings | Axial Load Factor Y1:2.21; Configuration:Double Row; Retainer Material:Machined Brass; Roller Profile:Symmetric; Hole Diameter (do):20 mm; Enclosure:Open; Limiting Speed - Grease:420 rpm; Weight:468.000 kg; Axial Load Factor Y2:3.29; D:820 mm; Constant e:0.31; Nr. of Holes:8; d:560 mm; Center Guidance:Fixed Inner Ring Rib; B:258 mm; Radial Clearance:0.440 to 0.600 mm; Static Load Rating:13,500,000 N; |
| 11.20.1385.001.21.1504 Standard 5 Slewing Ring Bearings | d:45 mm; ra (max):1.5 mm; Configuration:Double Row; Limiting Speed - Grease:4,500 rpm; Axial Load Factor Y1:1.83; da (min):53.5 mm; Da (max):91.5 mm; Fillet Radius/Chamfer:1.5 mm; Limiting Speed - Oil:5,600 rpm; Radial Clearance:0.075 to 0.091 mm; Roller Profile:Symmetric; Axial Load Factor Y0:1.79; Hole Diameter (do):4 mm; Axial Load Factor Y2:2.72; Static Load Rating:182,000 N; Bore Type:Cylindrical Bore; |
| 12.30.1800.000.11.1503 Standard 5 Slewing Ring Bearings | Cap bolt:2 x 5/8-11 UNC; J1:53.975 mm; H:167.481 mm; P120°:21.8 kN; J min.:244.475 mm; P60°:60.5 kN; N1:19.05 mm; H2:31.75 mm; R1:53.181 mm; da:53.975 mm; Da:140 mm; Max. speed for Taconite seal:1400 r/min; Initial grease fill:175.77 g; Pa:6.49 kN; End plug (suffix Y):EPR 7; P150°:19.6 kN; Housing:FSAF 613; A2:209.55 mm; Taconite seal:TER 31; L:330.2 mm; |
| 91.25.1310.990.11.1503 Standard 5 Slewing Ring Bearings | C_conv:222000; Z_:13; dd min:86; B_:46; GRS rpm:4300; dc min:79; DE_:115; r:2.1; SDM_:96; SBRG:23; C:222; hidYobi:NUP2312ET; D_:130; TSR rpm:5600; yobi:NUP2312ET; db min:71; db max:75; ra:2; rb:2; Oil rpm:5300; |
| 161.45.2510.891.41.1503 Standard 5 Slewing Ring Bearings | Radial Clearance:0.140 to 0.200 mm; Da (max):286 mm; Groove Width A:18 mm; Weight:28.200 kg; Configuration:Double Row; Hole Diameter (do):8 mm; Limiting Speed - Grease:1,800 rpm; Bore Type:Tapered Bore; ra (max):2.5 mm; Center Guidance:Fixed Inner Ring Rib; Roller Profile:Asymmetric; Enclosure:Open; Dynamic Load Rating:1,450,000 N; Static Load Rating:1,740,000 N; Axial Load Factor Y0:2.00; d:180 mm; |
| 62.30.1250.001.21.1504 Standard 5 Slewing Ring Bearings | Enclosure:Double Seal; Bore Type:Cylindrical Bore; B:5 mm; Dynamic Load Rating:2,120 N; Da (max):17 mm; ra (max):0.3 mm; Limiting Speed - Grease:24,000 rpm; Fillet Radius/Chamfer:0.3 mm; da (min):12 mm; Static Load Rating:985 N; d:10 mm; D:19 mm; Factor fo:14.2; Radial Clearance:0.008 to 0.023 mm; Weight:0.005 kg; Configuration:Single Row; |
| 60.25.1355.500.11.1503 Standard 5 Slewing Ring Bearings | Taconite seal:TER 118; Eye bolt:2 x 3/8-16 UNC; Initial grease fill:232.47 g; Ca:62.789 mm; ba:51.594 mm; J min.:320.675 mm; P150°:59.6 kN; R1:73.025 mm; A1:120.65 mm; L:419.1 mm; H2:52.388 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt, SAE grade:8; A2:231.775 mm; Pa:20.2 kN; J max.:368.3 mm; Max. speed for Taconite seal:700 r/min; RG:3/8 NPT; P90°:107 kN; PG:1/4 NPT; |
| 91.30.1415.990.11.1502 Standard 5 Slewing Ring Bearings | PCD:51.7; B_:19; da:36.5; cyl count:13; KBRG:1352; Oil rpm:11000; Prod_Type3:SABB_SA_TB; Y2:3.7; GRS rpm:8500; X0:1; ra:1; Y3:2.4; SRI:5; C:21.4; mass:0.385; D_a:65.5; yobi:1306K; D_:72; hidYobi:1306K; groove outer:62.02; |
| 161.50.2500.891.41.1503 Standard 5 Slewing Ring Bearings | hidYobi:NNU4948K; B_:80; hidTable:ecat_NSCLDRD; Fw:263; C:625; dc min:269; KBRG:4248; DA_:18; LangID:1; da min:251; D_:320; yobi:NNU4948K; C0:1450; da max:262; SDM_:281; d1a min:254; GRS rpm:1600; D_a max:309; DE_:299; mass:18; |
| 192.25.2240.990.41.1502 Standard 5 Slewing Ring Bearings | d:88.9 mm; b:10.5 mm; da min.:94.6 mm; Mass plain bearing:4.8 kg; Sealing solution:Triple-lip seals; Material constant KM:330; rb max.:1 mm; Specific dynamic load factor K:100 N/mm²; Lubricant:Regular relubricatio; Da min.:122.8 mm; ra max.:0.6 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; D:139.7 mm; B:77.775 mm; M:6.5 mm; da max.:101.7 mm; Specific static load factor K0:300 N/mm²; |
| No. | Brand | B | U | T | E | e | b | S | G |
| 162.40.2128.891.41.1503 | Standard 5 | 73 mm | - | - | - | - | - | - | - |
| 92.30.1607.991.21.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.40.2395.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.25.1200.600.11.1503 | Standard 5 | 80 mm | - | - | - | - | - | - | - |
| 62.30.1400.001.21.1504 | Standard 5 | 106 mm | - | - | - | - | - | - | - |
| 161.25.1320.891.21.1503 | Standard 5 | 52 mm | - | - | - | - | - | - | - |
| 161.36.1900.890.11.1503 | Standard 5 | - | - | - | - | 0.38 | - | - | - |
| 161.36.1900.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.45.2654.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.2240.001.41.1502 | Standard 5 | - | 13 mm | - | - | - | - | - | - |
| 161.28.1500.891.21.1503 | Standard 5 | 13 mm | - | - | - | - | - | - | - |
| 161.45.2510.890.11.1503 | Standard 5 | 32 mm | - | - | - | - | - | - | - |
| 61.30.1320.001.21.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.45.2510.891.41.1503 | Standard 5 | 52 mm | - | - | - | - | - | - | - |
| 161.25.1320.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.35.2620.000.11.1503 | Standard 5 | 26 mm | - | - | - | - | - | - | - |
| 161.28.1700.890.11.1503 | Standard 5 | 25 mm | - | - | - | - | - | - | - |
| 11.25.1800.001.41.1503 | Standard 5 | 22 mm | - | - | - | - | - | - | M 22x1.5 |
| 191.20.1250.990.41.1502 | Standard 5 | 25 mm | - | - | - | - | - | - | M 160x3 |
| 12.20.1360.001.21.1504 | Standard 5 | 18 mm | - | - | - | - | 2.7 mm | - | - |
| 191.20.1400.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.1355.500.11.1503 | Standard 5 | 18 mm | - | - | - | - | - | - | - |
| 92.25.1502.991.21.1503 | Standard 5 | 30.924 mm | - | - | - | - | - | - | - |
| 11.20.1385.001.21.1504 | Standard 5 | 36 mm | - | - | - | - | - | - | - |
| 11.25.1461.001.21.1503 | Standard 5 | 30.2 mm | - | - | - | - | - | - | - |
| 12.30.1630.000.11.1503 | Standard 5 | - | 20 mm | - | - | - | - | - | - |
91.40.2395.990.11.1502 Standard 5 Slewing Ring Bearings Video
091.40.2395.990.11.1502 - Slewing Ring Bearings Manufacturers ...
LYMC bearings are the perfect alternative to the most common and well-known brands.
091.40.2395.990.11.1502 Slewing Ring Bearings
091.40.2395.990.11.1502 Slewing Ring Bearings ; Type, Ball ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 2212 mm ; Outside Diameter Of Outer Ring ...