| 191.25.1800.990.41.1502 Standard 5 Slewing Ring Bearings | db (max):77 mm; r1:1.5 mm; dd (min):87 mm; Limiting Speed - Oil:6,000 rpm; D:120 mm; Configuration:Single Row; dc (min):81 mm; ra (max):1.5 mm; Bore Type:Cylindrical Bore; ra1 (max):1.5 mm; Inside Ring Outside Diameter:78.5 mm; B:31 mm; Limiting Speed - Grease:4,800 rpm; d:65 mm; Static Load Rating:181,000 N; Radial Clearance:0.040 to 0.070 mm; db (min):73.5 mm; Fillet Radius/Chamfer:1.5 mm; Da (max):111.5 mm; |
| 280.30.1400.013 Type 110/1600. Standard 5 Slewing Ring Bearings | Cap bolt recommended tightening torque:81.3 N·m; Pa:5.65 kN; A1:79.375 mm; End plug (suffix Y):EPR 7; A2:118.666 mm; h:31.75 mm; Cap bolt:2 x 1/2-13 UNC; P90°:45.4 kN; Stabilizing ring:2 x SR-15-0; P150°:25.4 kN; H:157.559 mm; H2:28.575 mm; Ca:37.008 mm; Labyrinth ring:2 x LOR 38; P120°:28 kN; ba:30.163 mm; PG:1/8 NPT; Mass pillow block:13.1 kg; Cap bolt, SAE grade:5; Bearing limiting speed:6700 r/min; |
| 61.40.1800.014.29.1503 Standard 5 Slewing Ring Bearings | r1,2 min.:2 mm; s1 max.:17.8 mm; s2 max.:17.8 mm; Da max.:170 mm; d2 ≈:139 mm; d:120 mm; ra max.:2 mm; Mass bearing:4.95 kg; Basic static load rating C0:640 kN; D1 ≈:164 mm; Operating clearance factor k2:0.142; D:180 mm; Limiting speed:1400 r/min; Misalignment factor k1:0.085; B:60 mm; Basic dynamic load rating C:430 kN; Fatigue load limit Pu:65.5 kN; |
| 11.30.1734.001.41.1503 Standard 5 Slewing Ring Bearings | J:136.525 mm; a:2.381 mm; Attachment bolt diameter G:15.875 mm; A6:25.4 mm; Mass bearing unit:7.76 kg; s:31.75 mm; L:174.625 mm; da:63.5 mm; A5:34.131 mm; Basic dynamic load rating C:148 kN; Limiting speed:3100 r/min; A1:88.106 mm; S:0.794 mm; d2:101.6 mm; N1:17.462 mm; A:69.85 mm; B:85.725 mm; |
| 11.40.2619.001.41.1502 Standard 5 Slewing Ring Bearings | D1 (max):145.2 mm; Enclosure:Single Shield with S; D:150 mm; Cy (max):7.3 mm; da (min):82 mm; Dx (min):162 mm; r1:0.5 mm; B:35 mm; Da (max):138 mm; Weight:2.520 kg; a (max):4.9 mm; Radial Clearance:0.025 to 0.051 mm; Fillet Radius/Chamfer:2.1 mm; Configuration:Single Row; Limiting Speed - Oil:5,400 rpm; ra (max):2 mm; b (min):3.1 mm; Bore Type:Cylindrical Bore; Static Load Rating:68,000 N; d:70 mm; |
| 60.25.1155.500.11.1503 Standard 5 Slewing Ring Bearings | Initial grease fill:87.885 g; R2:21.431 mm; h:31.75 mm; da:68.263 mm; Cap bolt recommended tightening torque:149.1 N·m; P180°:31.6 kN; Cap bolt, SAE grade:5; J max.:279.4 mm; Housing:SAF 516; H1:88.9 mm; P150°:26.7 kN; H:169.863 mm; L:330.2 mm; PG:1/8 NPT; P90°:49.8 kN; End plug (suffix Y):EPR 8; Stabilizing ring:SR-16-13; Appropriate attachment bolt size G:0.75 in; Pa:7.83 kN; Da:140 mm; |
| 161.40.2240.891.41.1503 Standard 5 Slewing Ring Bearings | Mass pillow block:160 kg; Housing:SSAFS 040 KA; Pa:48.9 kN; Da:309.999 mm; da:184.15 mm; ba:74.612 mm; Ca:95.809 mm; P90°:207 kN; H2:69.85 mm; H:358.775 mm; R2:37.306 mm; P180°:133 kN; P150°:113 kN; PG:1/4 NPT; P60°:345 kN; P120°:127 kN; L:628.65 mm; Taconite seal:TER 160; R1:115.888 mm; Initial grease fill:878.85 g; |
| 11.20.1220.000.11.1504 Standard 5 Slewing Ring Bearings | Static Load Rating:86,500 N; ra (max):2 mm; da (min):92 mm; Dynamic Load Rating:123,000 N; Fillet Radius/Chamfer:2.1 mm; Da (max):158 mm; Radial Clearance:0.025 to 0.051 mm; B:39 mm; Bore Type:Cylindrical Bore; Weight:3.590 kg; Limiting Speed - Grease:4,000 rpm; D:170 mm; Factor fo:13.2; Enclosure:Double Shield; d:80 mm; Configuration:Single Row; |
| 192.32.2800.990.41.1502 Standard 5 Slewing Ring Bearings | Appropriate attachment bolt size G:0.75 in; Cap bolt recommended tightening torque:515.2 N·m; Max. speed for PosiTrac Plus seal:1950 r/min; PG:1/8 NPT; PosiTrac Plus contact element:2 x B10724-164; Mass pillow block:34 kg; P180°:42.7 kN; P60°:104 kN; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 10; Pa:15.3 kN; N1:22.225 mm; Cap bolt:2 x 3/4-10 UNC; J max.:333.375 mm; Da:180 mm; S:4.763 mm; |
| 92.50.2446.990.41.1502 Standard 5 Slewing Ring Bearings | Dynamic Load Rating:28,300 N; Configuration:Single Row; ra (max):1 mm; Factor fo:15.4; b (min):2.7 mm; D:90 mm; da (min):61 mm; Snap Ring Outside Diameter:96.5 mm; Bore Type:Cylindrical Bore; d:55 mm; r1:0.5 mm; Weight:0.375 kg; Static Load Rating:21,300 N; Enclosure:Single Shield with S; a (max):2.9 mm; Snap Ring Width:2.5 mm; Cy (max):5 mm; D1 (max):86.8 mm; Fillet Radius/Chamfer:1.1 mm; Da (max):84 mm; |
| 62.40.1700.007.19.1503 Standard 5 Slewing Ring Bearings | J1:50.8 mm; Cap bolt recommended tightening torque:149.1 N·m; H2:30.163 mm; P150°:12 kN; Mass pillow block:12.4 kg; R1:44.45 mm; P120°:13.3 kN; RG:1/8 NPT; L:279.4 mm; A1:79.375 mm; H1:82.55 mm; End plug (suffix Y):EPR 5; PG:1/8 NPT; P180°:14.2 kN; Appropriate attachment bolt size G:0.5 in; Pa:4.8 kN; Cap bolt, SAE grade:8; Max. speed for Taconite seal:1575 r/min; h:38.1 mm; P90°:21.4 kN; |
| 192.32.2240.990.41.1502 Standard 5 Slewing Ring Bearings | Fillet Radius/Chamfer:2.1 mm; Limiting Speed - Grease:3,600 rpm; Enclosure:Open; dd (min):130 mm; Limiting Speed - Oil:4,300 rpm; db (min):112 mm; Dynamic Load Rating:183,000 N; da (min):112 mm; Db (max):164 mm; Radial Clearance:0.050 to 0.085 mm; Configuration:Single Row; Da (max):168 mm; r1:2.1 mm; dc (min):122 mm; Db (min):168 mm; ra (max):2 mm; d:100 mm; Bore Type:Cylindrical Bore; Outside Ring Inside Diameter:160 mm; |
| 92.30.1799.990.11.1502 Standard 5 Slewing Ring Bearings | Axial Load Factor Y2:2.65; D:480 mm; Bore Type:Cylindrical Bore; Axial Load Factor Y1:1.78; Roller Profile:Symmetric; B:174 mm; Dynamic Load Rating:3,950,000 N; Fillet Radius/Chamfer:5 mm; Configuration:Double Row; da (min):282 mm; Da (max):458 mm; Static Load Rating:4,800,000 N; Retainer Material:Machined Brass; Constant e:0.38; Axial Load Factor Y0:1.74; Enclosure:Open; Weight:142.000 kg; Center Guidance:Fixed Inner Ring Rib; |
| 161.36.2000.891.41.1503 Standard 5 Slewing Ring Bearings | d:22 mm; Mass inner ring:0.036 kg; F:28 mm; r, r1,2 min.:0.3 mm; B:20.5 mm; |
| No. | Brand | B | U | T | E | e | b | S | G |
| 161.45.2510.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.30.1500.201.21.1523 | Standard 5 | 146 mm | - | - | - | - | 16.7 mm | - | - |
| 11.25.1200.600.11.1503 | Standard 5 | 80 mm | - | - | - | - | - | - | - |
| 12.30.1381.000.11.1503 | Standard 5 | 243 mm | - | - | - | - | - | - | - |
| 92.25.1310.990.11.1503 | Standard 5 | 9 mm | - | - | - | - | - | - | - |
| 11.35.1750.701.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.30.2538.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.40.2800.990.41.1502 | Standard 5 | 39 mm | - | - | - | - | - | - | - |
| 92.35.1900.990.11.1502 | Standard 5 | 145 mm | - | - | - | - | - | - | - |
| 192.20.1800.990.41.1502 | Standard 5 | 75 mm | - | - | - | - | - | - | Tr 560x6 |
| 92.30.1415.990.11.1502 | Standard 5 | 165 mm | - | - | - | - | - | - | - |
| 162.28.1500.891.21.1503 | Standard 5 | 208 mm | - | - | - | - | - | - | - |
| 92.30.1799.991.21.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.40.1500.001.29.1504 | Standard 5 | 160 mm | - | - | - | - | - | - | - |
| 91.25.1502.991.21.1503 | Standard 5 | 64 mm | - | - | - | - | - | - | - |
| 12.30.2330.001.41.1503 | Standard 5 | 30.162 mm | - | 30.162 mm | - | - | - | - | - |
| 91.30.1415.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.50.2842.990.41.1502 | Standard 5 | 23 mm | - | - | - | - | - | - | - |
| 281.30.1475.013 Type 110/1600.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 191.20.1250.990.41.1502 | Standard 5 | 25 mm | - | - | - | - | - | - | M 160x3 |
| 91.20.1246.991.21.1503 | Standard 5 | 16.129 mm | - | - | - | - | - | - | 84.836 mm |
| 91.35.1802.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | Tr 400x5 |
| 62.40.1700.008.29.1503 | Standard 5 | - | - | 49.212 mm | - | - | - | - | - |
| 91.40.2003.991.41.1502 | Standard 5 | 46 mm | - | 49 mm | - | - | - | - | - |
| 280.30.1300.013 Type 110/1500. | Standard 5 | - | - | - | 42 mm | - | - | - | - |
| 162.28.1700.891.21.1503 | Standard 5 | 100 mm | - | - | - | - | - | - | - |
| 91.30.1415.991.21.1502 | Standard 5 | 16 mm | - | - | - | - | - | - | - |
| 61.25.1255.575.11.1403 | Standard 5 | 56 mm | - | - | - | - | - | - | - |
| 281.30.1400.013 Type 110/1600.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.40.2000.890.11.1503 | Standard 5 | 20 mm | - | - | - | - | - | - | - |
92.35.2012.990.11.1502 Standard 5 Slewing Ring Bearings Video
091.35.2012.990.11.1502 - Slewing Ring Bearings Manufacturers ...
LYMC bearings are the perfect alternative to the most common and well-known brands.