| 12.25.1360.600.11.1503 Standard 5 Slewing Ring Bearings | d:45; rb:1.5; yobi:NUP309ET; C0:98.5; dd min:66; hidTable:ecat_NSCLDR; hidYobi:NUP309ET; ra:1.5; r:1.5; LangID:1; Z_:13; da:53; Oil rpm:7500; db min:53; B_:25; db max:56; D_a max:92; Fw:58.5; DE_:88.5; SDM_:73.5; |
| 161.36.1900.890.11.1503 Standard 5 Slewing Ring Bearings | D_a:202; da:113; e:0.38; yobi:2320K; cyl count:13; Oil rpm:3200; ra:2.5; groove outer:195.716; X0:1; Y0:1.8; r:3; Y3:1.7; hidTable:ecat_NSSAB; d:100; C0:79; PCD:157.5; cyl dia:33.338; GRS rpm:2400; groove inner:124.078; C:187; |
| 162.45.2240.891.41.1503 Standard 5 Slewing Ring Bearings | d:25 mm; r1:1.1 mm; Enclosure:Open; Limiting Speed - Grease:9,300 rpm; Static Load Rating:41,000 N; dd (min):40 mm; Radial Clearance:0.020 to 0.045 mm; Weight:0.340 kg; Limiting Speed - Oil:11,000 rpm; dc (min):37 mm; Bore Type:Cylindrical Bore; Da (max):55 mm; B:24 mm; Configuration:Single Row; db (max):33 mm; db (min):32 mm; D:62 mm; ra (max):1 mm; ra1 (max):1 mm; Fillet Radius/Chamfer:1.1 mm; |
| 61.40.1400.001.29.1504 Standard 5 Slewing Ring Bearings | H:244.475 mm; db:123.825 mm; Eye bolt:3/8-16 UNC; Bearing limiting speed:4000 r/min; P60°:178 kN; A2:165.1 mm; H1:125.425 mm; dc:106.362 mm; Housing:SAFS 222; RG:3/8 NPT; ba:50.006 mm; Ca:62.789 mm; Da:200 mm; R1:67.866 mm; P120°:66.7 kN; PG:1/4 NPT; R2:31.75 mm; End plug (suffix Y):EPR 14; A1:120.65 mm; Initial grease fill:481.95 g; |
| 92.20.1246.991.21.1503 Standard 5 Slewing Ring Bearings | ra:1; SREX:0.025; Prod_Type3:DGBB_SR_DD; LangID:1; yobi:6012DDU; KBRG:6161; da min:66.5; B_:18; r:1.1; C_conv:29500; SREN:-0.025; DE_:87.819; GRS rpm:4000; da max:69; D_a:88.5; SDM_:77.5; hidYobi:6012DDU; D_:95; SRI:5.34; SRIX:0.025; |
| 161.28.1700.891.21.1503 Standard 5 Slewing Ring Bearings | GRS rpm:5000; hidYobi:NJ310ET; C_conv:110000; ra:2; db max:63; B_:27; dc min:67; SBRG:3; Oil rpm:6000; db min:59; dd min:73; DI_:65; KBRG:4152; DA_:16; C0:113; d:50; D_:110; TSR rpm:6700; rb:2; SDM_:81; |
| 12.40.2199.301.41.1502 Standard 5 Slewing Ring Bearings | Mass inner ring:1.51 kg; r, r1,2 min.:1.1 mm; B:45 mm; d:180 mm; F:195 mm; |
| 11.40.2240.001.41.1502 Standard 5 Slewing Ring Bearings | Basic static load rating C0:25.5 kN; U:13 mm; Ew:35 mm; Fw:30 mm; Reference speed:13000 r/min; Basic dynamic load rating C:15.1 kN; Fatigue load limit Pu:3 kN; Mass needle roller and cage assembly:0.014 kg; Limiting speed:15000 r/min; |
| 61.25.1250.100.11.1504 Standard 5 Slewing Ring Bearings | ra max.:4 mm; Axial load factor Y:0.4; D:500 mm; r1,2 min.:5 mm; B:155 mm; F:299 mm; Fatigue load limit Pu:345 kN; da max.:294 mm; Mass bearing:151 kg; Calculation factor kr:0.38; d1 ≈:326 mm; da min.:258 mm; Da max.:482 mm; Limiting value e:0.3; D1 ≈:425 mm; Reference speed:1200 r/min; Basic static load rating C0:4000 kN; db min.:331 mm; Limiting speed:2400 r/min; |
| 162.45.2366.891.41.1503 Standard 5 Slewing Ring Bearings | Stabilizing ring:SR-38-32; P90°:173 kN; Da:339.999 mm; Cap bolt recommended tightening torque:271.2 N·m; Housing:SAF 632; P120°:107 kN; PosiTrac Plus contact element:2 x B10724-130; Initial grease fill:1672.65 g; Pa:54.3 kN; ba:87.313 mm; S:4.763 mm; Cap bolt:4 x 7/8-9 UNC; da:138.113 mm; L:711.2 mm; h:68.263 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 16; R2:42.069 mm; Appropriate attachment bolt size G:1.25 in; |
| 161.36.1700.891.41.1503 Standard 5 Slewing Ring Bearings | B_:450; SIR:170; GRS rpm:160; X2:0.67; DA_:140; DI_:861.52; Z_:18; yobi:232/710CAMKE4; SDM_:997.652; LangID:1; C0:30500; SBRG:32; hidYobi:232/710CAMKE4; Y1:1.8; r:12; X1:1; Y3:1.9; bomp:232/710CAMKE4; e:0.36; ALP1:13; |
| 161.25.1320.891.21.1503 Standard 5 Slewing Ring Bearings | Bore Type:Cylindrical Bore; Radial Clearance:0.075 to 0.125 mm; r1:4 mm; ra1 (max):3 mm; Fillet Radius/Chamfer:4 mm; Inside Ring Outside Diameter:218 mm; Static Load Rating:675,000 N; dc (min):221 mm; Dynamic Load Rating:495,000 N; B:52 mm; Da (max):302 mm; Limiting Speed - Oil:2,200 rpm; Configuration:Single Row; db (max):214 mm; D:320 mm; db (min):198 mm; d:180 mm; ra (max):3 mm; Enclosure:Open; |
| 161.28.1600.891.21.1503 Standard 5 Slewing Ring Bearings | Da:339.999 mm; Housing:SAW 538; Pa:68.5 kN; Eye bolt:2 x 3/8-16 UNC; Max. speed for PosiTrac Plus seal:825 r/min; Appropriate attachment bolt size G:1.25 in; H1:200.025 mm; Cap bolt recommended tightening torque:271.2 N·m; RG:1 NPT; P180°:113 kN; L:711.2 mm; da:177.8 mm; A2:273.05 mm; Labyrinth ring:2 x LOR 156; Initial grease fill:1672.65 g; A1:190.5 mm; N1:34.925 mm; R2:42.069 mm; End plug (suffix Y):EPR 21; |
| 12.35.2690.001.41.1503 Standard 5 Slewing Ring Bearings | Static Load Rating:68,000 N; Bore Type:Cylindrical Bore; Fillet Radius/Chamfer:1.1 mm; db (min):52 mm; r1:1.1 mm; Enclosure:Open; ra (max):1 mm; ra1 (max):1 mm; Configuration:Single Row; Dynamic Load Rating:61,500 N; Inside Ring Outside Diameter:55 mm; Limiting Speed - Grease:7,400 rpm; B:23 mm; db (max):54 mm; dc (min):57 mm; Radial Clearance:0.030 to 0.060 mm; Limiting Speed - Oil:8,900 rpm; d:45 mm; |
| No. | Brand | B | U | T | E | e | b | S | G |
| 61.40.1400.000.19.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.50.2800.891.41.1503 | Standard 5 | 58 mm | - | - | - | - | - | - | - |
| 161.28.1600.890.11.1503 | Standard 5 | - | - | - | 1 | - | - | - | M20×1.5 |
| 12.30.1630.000.11.1503 | Standard 5 | - | 20 mm | - | - | - | - | - | - |
| 161.45.2366.891.41.1503 | Standard 5 | 135 mm | - | - | - | - | - | - | Tr 400x5 |
| 11.40.2240.001.41.1502 | Standard 5 | - | 13 mm | - | - | - | - | - | - |
| 282.30.1400.013 Type 110/1600.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 191.25.2800.990.41.1502 | Standard 5 | 32.004 mm | - | - | - | - | - | - | 219.151 mm |
| 162.36.2000.890.11.1503 | Standard 5 | 85 mm | - | - | - | - | - | - | Tr 600x6 |
| 192.20.1600.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.40.2128.890.11.1503 | Standard 5 | 26 mm | - | - | - | - | - | - | - |
| 60.25.1155.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.28.1600.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.28.1700.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.35.1704.990.11.1502 | Standard 5 | 21 mm | - | - | - | - | 12 mm | - | M 130x2 |
| 192.25.2500.990.41.1502 | Standard 5 | 5 mm | - | - | - | - | - | - | - |
| 12.35.1960.400.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.40.2240.000.11.1502 | Standard 5 | 280 mm | - | - | - | - | - | - | - |
| 11.25.1461.001.21.1503 | Standard 5 | 30.2 mm | - | - | - | - | - | - | - |
| 192.20.1400.990.41.1502 | Standard 5 | 42 mm | - | - | - | - | - | - | - |
| 282.30.1475.013 Type 110/1600.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.28.1500.891.21.1503 | Standard 5 | 13 mm | - | - | - | - | - | - | - |
| 282.30.1375.013 Type 110/1500.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.36.1800.890.11.1503 | Standard 5 | 62 mm | - | - | - | - | - | - | - |
| 161.40.2000.890.11.1503 | Standard 5 | 20 mm | - | - | - | - | - | - | - |
| 92.25.1502.990.11.1503 | Standard 5 | 13 mm | - | - | - | - | - | - | - |
| 161.45.2510.890.11.1503 | Standard 5 | 32 mm | - | - | - | - | - | - | - |
61.40.1800.013.19.1503 Standard 5 Slewing Ring Bearings Video
48 CFR § 19.1503 - Status.
(a) Status as an EDWOSB concern or WOSB concern eligible under the WOSB Program is determined in accordance with 13 CFR part 127.
Federal Acquisition Regulation 19.1503
Women-Owned Small Business (WOSB). Program. (b) The purpose of the WOSB Pro- gram is to ensure women-owned small business concerns have an equal oppor-.2 pagesMissing: 61.40.1800.013.19.1503 | Must include: 61.40.1800.013.19.1503
19.1503 Status. |
19.1503 Status. (a) Status as an EDWOSB concern or WOSB concern eligible under the WOSB Program is determined in accordance with 13 CFR part 127.