| 91.35.2012.990.11.1502 Standard 5 Slewing Ring Bearings | Da:160 mm; P60°:141 kN; Cap bolt:1/2-13 UNC; Cap bolt, SAE grade:8; PG:1/8 NPT; J max.:295.275 mm; P150°:48 kN; ba:40.481 mm; S:4.763 mm; J min.:263.525 mm; Ca:49.809 mm; da:82.55 mm; Mass pillow block:30.8 kg; End plug (suffix Y):EPR 11; H:196.85 mm; P90°:84.5 kN; Labyrinth ring:2 x LOR 187; Bearing limiting speed:5300 r/min; Housing:SAFS 518; Appropriate attachment bolt size G:0.75 in; |
| 191.25.2500.990.41.1502 Standard 5 Slewing Ring Bearings | Dynamic Load Rating:345,000 N; Bore Type:Cylindrical Bore; d:140 mm; Limiting Speed - Grease:2,550 rpm; Configuration:Double Row; Hole Diameter (do):4 mm; Da (max):181.5 mm; da (min):148.5 mm; D:190 mm; ra (max):1.5 mm; Axial Load Factor Y0:3.71; B:37 mm; Groove Width A:7 mm; Radial Clearance:0.095 to 0.145 mm; Axial Load Factor Y1:3.79; Retainer Material:Machined Brass; Constant e:0.18; Weight:3.130 kg; |
| 11.30.1440.191.41.1503 Standard 5 Slewing Ring Bearings | H1:241.3 mm; Initial grease fill:2749.95 g; J min.:628.65 mm; L:831.85 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 23; Pa:71.2 kN; P180°:173 kN; PosiTrac Plus contact element:2 x B10724-167; J1:133.35 mm; PG:1/4 NPT; Stabilizing ring:SR-44-38; Da:399.999 mm; da:201.613 mm; A2:304.8 mm; Appropriate attachment bolt size G:1.5 in; P120°:160 kN; P60°:423 kN; N1:41.275 mm; Max. speed for PosiTrac Plus seal:725 r/min; |
| 11.20.1385.001.21.1504 Standard 5 Slewing Ring Bearings | d:45 mm; ra (max):1.5 mm; Configuration:Double Row; Limiting Speed - Grease:4,500 rpm; Axial Load Factor Y1:1.83; da (min):53.5 mm; Da (max):91.5 mm; Fillet Radius/Chamfer:1.5 mm; Limiting Speed - Oil:5,600 rpm; Radial Clearance:0.075 to 0.091 mm; Roller Profile:Symmetric; Axial Load Factor Y0:1.79; Hole Diameter (do):4 mm; Axial Load Factor Y2:2.72; Static Load Rating:182,000 N; Bore Type:Cylindrical Bore; |
| 192.25.2240.990.41.1502 Standard 5 Slewing Ring Bearings | d:88.9 mm; b:10.5 mm; da min.:94.6 mm; Mass plain bearing:4.8 kg; Sealing solution:Triple-lip seals; Material constant KM:330; rb max.:1 mm; Specific dynamic load factor K:100 N/mm²; Lubricant:Regular relubricatio; Da min.:122.8 mm; ra max.:0.6 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; D:139.7 mm; B:77.775 mm; M:6.5 mm; da max.:101.7 mm; Specific static load factor K0:300 N/mm²; |
| 61.50.2130.001.49.1504 Standard 5 Slewing Ring Bearings | Recommended diameter for attachment bolts, inch G:0.375 in; Hexagonal key size for grub screw N:2.5 mm; N4:4 mm; A5:18 mm; L:95 mm; B1:33 mm; Housing:FY 505 M/VZ033; J6:83 mm; N:11.5 mm; Recommended tightening torque for grub screw:4.2 N·m; Basic static load rating C0:7.8 kN; A1:12 mm; A:30 mm; J7:19 mm; Fatigue load limit Pu:0.335 kN; Da:74.6 mm; Recommended diameter for attachment bolts, mm G:10 mm; |
| 62.30.1400.000.11.1504 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:72.8 kN; DN:6.579 mm; Mass bearing unit:6.55 kg; Hexagonal key size for grub screw N:5.556 mm; L:197 mm; Fatigue load limit Pu:2.16 kN; N:22 mm; R1:34.5 mm; T:82.5 mm; J:152.5 mm; Basic static load rating C0:53 kN; Db1:162 mm; A:59 mm; Recommended diameter for attachment bolts, inch G:0.75 in; RG:1/8-27 NPT; SWN:11.113 mm; Limiting speed:2400 r/min; Thread grub screw G2:7/16-20 UNF; |
| 62.25.1355.575.11.1403 Standard 5 Slewing Ring Bearings | G2:G 1/4; d1:850 mm; B1:585 mm; Mass withdrawal sleeve:489 kg; G:Tr 950x8; B2:605 mm; G1:70 mm; A:15 mm; Hydraulic nut:HMV 190 E; d:900 mm; |
| 192.25.1800.990.41.1502 Standard 5 Slewing Ring Bearings | ALPHA_:30; C:300; ALP21:30; C0:430; SDM_:214.976; GRS rpm:1600; D_:260; Prod_Type3:ACBB_SR_MM_DB; SBRG:10; mass:15.8; m0:1.072; LangID:1; d:170; yobi:7034ADB; D_b:253; SRE:14.03; 2B_:84; DI_:187.831; KBRG:7124; da:182; |
| 191.20.1250.990.41.1502 Standard 5 Slewing Ring Bearings | G:M 160x3; d3:190 mm; B4:27.5 mm; Mass adapter sleeve assembly:5.1 kg; d1:139.7 mm; B1:93 mm; Hydraulic nut:HMV 32 E; d:160 mm; B:25 mm; |
| 62.30.1600.001.21.1504 Standard 5 Slewing Ring Bearings | r1 max.:0.4 mm; Mass needle roller:0.136 g; r2 max.:0.6 mm; r1,2 min.:0.1 mm; Dw:1.5 mm; Lw:9.8 mm; |
| 91.30.1607.990.11.1502 Standard 5 Slewing Ring Bearings | d:35 mm; Bore Type:Cylindrical Bore; Factor fo:13.8; Static Load Rating:15,300 N; B:17 mm; D:72 mm; Configuration:Single Row; da (min):42 mm; Weight:0.288 kg; Dynamic Load Rating:25,700 N; Da (max):65 mm; Radial Clearance:0.015 to 0.033 mm; Fillet Radius/Chamfer:1.1 mm; ra (max):1 mm; Limiting Speed - Grease:6,300 rpm; Enclosure:Double Seal; |
| 11.30.1440.190.11.1503 Standard 5 Slewing Ring Bearings | Limiting Speed - Oil:2,000 rpm; dc (min):195 mm; Enclosure:Open; db (max):190 mm; db (min):168 mm; d:150 mm; B:65 mm; Static Load Rating:920,000 N; Radial Clearance:0.115 to 0.165 mm; Configuration:Single Row; Inside Ring Outside Diameter:193 mm; Da (max):302 mm; D:320 mm; Bore Type:Cylindrical Bore; Dynamic Load Rating:755,000 N; r1:4 mm; Limiting Speed - Grease:1,600 rpm; dd (min):213 mm; Fillet Radius/Chamfer:4 mm; |
| 162.45.2654.891.41.1503 Standard 5 Slewing Ring Bearings | C_conv:167000; D_:150; B_:28; r1:2; Oil rpm:5000; C:167; da:94; GRS rpm:4300; DE_:136.5; C0:199; Z_:17; d:85; DA_:18; dc min:104; rb:2; D_a max:141; TSR rpm:4800; hidYobi:NUP217ET7; db max:98; LangID:1; |
| No. | Brand | B | U | T | E | e | b | S | G |
| 91.30.1799.991.21.1502 | Standard 5 | 53 mm | - | - | - | - | - | - | - |
| 12.30.1630.001.41.1503 | Standard 5 | 123.825 mm | - | - | - | - | 9.3 mm | - | - |
| 162.36.1700.891.41.1503 | Standard 5 | 33.3 mm | - | - | - | - | - | - | - |
| 62.25.1455.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.30.1630.000.11.1503 | Standard 5 | - | 20 mm | - | - | - | - | - | - |
| 162.45.2654.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.28.1700.890.11.1503 | Standard 5 | 25 mm | - | - | - | - | - | - | - |
| 12.25.1600.000.11.1503 | Standard 5 | 22 mm | - | - | - | - | - | - | - |
| 11.20.1385.000.11.1504 | Standard 5 | 30 mm | - | - | - | - | - | - | - |
| 91.25.1502.991.21.1503 | Standard 5 | 64 mm | - | - | - | - | - | - | - |
| 12.40.2622.400.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.25.1502.991.21.1503 | Standard 5 | 30.924 mm | - | - | - | - | - | - | - |
| 161.25.1180.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.35.1802.991.41.1502 | Standard 5 | 258 mm | - | - | - | - | - | - | - |
| 12.30.1381.001.41.1503 | Standard 5 | 58 mm | - | - | - | - | - | - | - |
| 61.25.1255.575.11.1403 | Standard 5 | 56 mm | - | - | - | - | - | - | - |
| 191.25.2800.990.41.1502 | Standard 5 | 32.004 mm | - | - | - | - | - | - | 219.151 mm |
| 161.36.1900.890.11.1503 | Standard 5 | - | - | - | - | 0.38 | - | - | - |
| 282.30.1375.013 Type 110/1500.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.30.1734.001.41.1503 | Standard 5 | 85.725 mm | - | - | - | - | - | 0.794 mm | - |
| 92.25.1310.991.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.20.1246.991.21.1503 | Standard 5 | 16.129 mm | - | - | - | - | - | - | 84.836 mm |
| 11.35.2620.000.11.1503 | Standard 5 | 26 mm | - | - | - | - | - | - | - |
| 61.25.1155.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.30.1500.201.21.1523 | Standard 5 | 146 mm | - | - | - | - | 16.7 mm | - | - |
| 192.25.2800.990.41.1502 | Standard 5 | 7 mm | - | - | - | - | - | - | - |
| 61.50.2355.001.49.1504 | Standard 5 | - | - | - | - | - | - | - | - |
60.25.1355.500.11.1503 Standard 5 Slewing Ring Bearings Video
060.25.1355.500.11.1503 thyssenkrupp rothe erde slewing ...
060.25.1355.500.11.1503 thyssenkrupp rothe erde slewing bearing ; Brand Name: Bower ; Model Number: 653 ; outside diameter:: 120 mm ; bore type:: Round ; snap ring ...