| 162.25.1120.891.21.1503 Standard 5 Slewing Ring Bearings | SKU:6211-2rsr-fag; B:21mm; d:55mm; Availability:In Stock; Fatigue Load Rating (kN):1.72; Static Load Rating (kN):29; Seals or Shields:Two Rubber Seals; Dynamic Load Rating (kN):46; Cage Type:Steel; Clearance:Standard; Limiting Speed Rating (r/min):3900; Weight:0.02 KGS; D:100mm; |
| 61.20.0400.101.21.1503 Standard 5 Slewing Ring Bearings | Reference Speed Rating (r/min):13000; Cage Type:Steel; Weight:0.02 KGS; Seals or Shields:Open Type; D:110mm; d:70mm; Availability:In Stock; Fatigue Load Rating (kN):1.32; B:20mm; Static Load Rating (kN):31; Clearance:C3; Dynamic Load Rating (kN):39.7; SKU:6014/c3-skf; Limiting Speed Rating (r/min):8000; |
| 91.25.1154.990.11.1503 Standard 5 Slewing Ring Bearings | Ca min.:2.9 mm; Mass bearing:470 kg; Basic static load rating C0:12900 kN; Da min.:807 mm; da min.:658 mm; D1 ≈:840 mm; r1,2 min.:7.5 mm; d2 ≈:716 mm; Limiting speed:670 r/min; Reference speed:480 r/min; Basic dynamic load rating C:6800 kN; Fatigue load limit Pu:815 kN; da max.:759 mm; B:212 mm; s1 max.:48.1 mm; Operating clearance factor k2:0.104; D:920 mm; d:630 mm; Da max.:892 mm; ra max.:6 mm; |
| 161.20.0450.891.21.1503 Standard 5 Slewing Ring Bearings | Availability:In Stock; Weight:0.02 KGS; d:130mm; Clearance:Standard; D:280mm; Cage Type:Brass; B:93mm; Seals or Shields:Open Type; SKU:22326-e1a-k-ma-t41a-; |
| 62.20.0630.001.21.1503 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:39300 N; Grease Speed Rating Open/Shielded n1:6200 rpm; Oil Speed Rating Open/Shielded n2:7500 rpm; Basic Static Radial Load Rating Co:32500 N; d:45.000 mm; Fillet Radius ra:1.00 mm; D:85.0000 mm; B:19.00 mm; Accessories:One Shield & Snap-Ri; |
| 231.21.0875.013 Type 21/950.1 Standard 5 Slewing Ring Bearings | Seals or Shields:Open Type; B:27mm; Weight:0.02 KGS; D:72mm; d:30mm; SKU:2306mc3-qbl; Clearance:C3; Cage Type:Brass; Availability:In Stock; |
| 62.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings | Mass bearing:1.26 kg; B:24 mm; Calculation factor f0:9.5; Static axial stiffness, preload class B:138 N/µm; Static axial stiffness, preload class C:191 N/µm; r1,2 min.:1.5 mm; Da max.:143 mm; Calculation factor f:1.12; db min.:107 mm; Preload class C GC:1440 N; Fatigue load limit Pu:1.5 kN; D1:132.61 mm; Ball diameter Dw:12.7 mm; Calculation factor fHC:1; Calculation factor f2A:1; Attainable speed for grease lubrication:12300 r/min; |
| 231.20.1000.503 Type 21/1200.1 Standard 5 Slewing Ring Bearings | d1:500 mm; Hydraulic nut:HMV 112 E; A:9 mm; d:530 mm; G2:G 1/4; G:Tr 560x6; B2:394 mm; G1:35 mm; B1:370 mm; Mass withdrawal sleeve:92 kg; |
| 230.21.0475.013 Type 21/520. Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:3800 rpm; D:110.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:5000 rpm; d:60.000 mm; Basic Dynamic Radial Load Rating C:78100 N; B:36.50 mm; Basic Static Radial Load Rating Co:88000 N; Accessories:No Shield, no Seal,; Grease Speed Rating n1:3800 rpm; |
| 231.20.0600.503 Type 21/750.1 Standard 5 Slewing Ring Bearings | Seals or Shields:Open Type; Static Load Rating (kN):112; Clearance:Standard; d:40mm; D:80mm; SKU:bsa208cgb-skf; Fatigue Load Rating (kN):4.15; Grease Limiting Speed (r/min):6300; Dynamic Load Rating (kN):42.5; Weight:0.43 KGS; Oil Limiting Speed (r/min):7500; B:18mm; Cage Type:Plastic; Availability:In Stock; |
| 62.20.0844.575.01.1403 Standard 5 Slewing Ring Bearings | R2:30.163 mm; Cap bolt, SAE grade:8; P180°:107 kN; Max. speed for PosiTrac Plus seal:1350 r/min; Initial grease fill:379.89 g; Cap bolt:5/8-11 UNC; Eye bolt:2 x 3/8-16 UNC; Stabilizing ring:SR-24-20; P120°:94.3 kN; Pa:20.7 kN; A2:190.5 mm; Labyrinth ring:2 x LOR 111; S:4.763 mm; Da:215.001 mm; H1:133.35 mm; A1:120.65 mm; H:257.175 mm; RG:1/2 NPT; P90°:149 kN; End plug (suffix Y):EPR 14; |
| 231.20.0400.013 Type 21/520.1 Standard 5 Slewing Ring Bearings | D:125mm; Clearance:Standard; SKU:16016-fag; Cage Type:Steel; Seals or Shields:Open Type; Fatigue Load Rating (kN):1.51; Availability:In Stock; Static Load Rating (kN):31; B:14mm; Reference Speed Rating (r/min):4700; Limiting Speed Rating (r/min):13000; Dynamic Load Rating (kN):32; Weight:0.61 KGS; d:80mm; |
| 3R16-245N1 Rotek Slewing Ring Bearings | Basic dynamic load rating C:400 kN; l2 max.:364 mm; r1 min.:1 mm; l7 min.:98 mm; G:M 64x4; Material constant KM:330; Basic static load rating C0:585 kN; dk:105 mm; Specific dynamic load factor K:100 N/mm²; h:270 mm; d:80 mm; C1 max.:48 mm; l1 min.:140 mm; d2 max.:182 mm; α:5 °; B:55 mm; Mass rod end:12 kg; |
| 162.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | Taconite seal:TER 45; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:149.1 N·m; R2:21.431 mm; A1:88.9 mm; Ca:42.799 mm; Da:140 mm; J1:53.975 mm; R1:53.181 mm; S:4.763 mm; Housing:FSAF 516; PG:1/8 NPT; H2:31.75 mm; J min.:244.475 mm; P90°:36 kN; End plug (suffix Y):EPR 8; A2:209.55 mm; Max. speed for Taconite seal:1150 r/min; h:31.75 mm; ba:34.131 mm; |
| No. | Brand | b | d | D | J | f | M | B | U |
| 61.20.0844.575.01.1403 | Standard 5 | - | 160mm | 270mm | - | - | - | 109mm | - |
| 280.30.0900.013 Type 110/1100. | Standard 5 | - | 17.000 mm | 62.0000 mm | - | - | - | 17.00 mm | - |
| 62.25.1055.500.11.1503 | Standard 5 | - | 60mm | 110mm | - | - | - | 36.5mm | - |
| 231.21.0675.013 Type 21/750.1 | Standard 5 | - | 60mm | 95mm | - | - | - | 18mm | - |
| 91.20.1006.990.11.1503 | Standard 5 | - | 40mm | 90mm | - | - | - | 33mm | - |
| 60.25.0955.575.11.1403 | Standard 5 | - | 60mm | 110mm | - | - | - | 28mm | - |
| 61.20.1094.500.01.1503 | Standard 5 | - | 55mm | 90mm | - | - | - | 18mm | - |
| 281.30.1100.013 Type 110/1300.1 | Standard 5 | - | 1.25 inch | 3.125 inch | - | - | - | 0.875 inch | - |
| 60.20.1094.500.01.1503 | Standard 5 | - | 420.000 mm | 560.0000 mm | - | - | - | 65.00 mm | - |
| 92.20.1006.991.21.1503 | Standard 5 | - | 320mm | 540mm | - | - | - | 218mm | - |
| 230.21.0775.013 Type 21/850. | Standard 5 | - | 60mm | 110mm | - | - | - | 22mm | - |
| 232.21.1075.013 Type 21/1200.2 | Standard 5 | - | 100mm | 215mm | - | - | - | 47mm | - |
| 62.25.1077.308.11.1504 | Standard 5 | - | - | - | 273.05 mm | - | - | 116.681 mm | - |
| 230.20.0700.013 Type 21/850. | Standard 5 | - | 17mm | 40mm | - | - | - | 12mm | - |
| 62.25.1155.575.11.1403 | Standard 5 | - | 60mm | 78mm | - | - | - | 10mm | - |
| 61.20.0844.500.01.1503 | Standard 5 | - | 8mm | 16mm | - | - | - | 6mm | - |
| 60.20.0644.500.01.1503 | Standard 5 | - | 25mm | 52mm | - | - | - | 18mm | - |
| 162.25.0886.890.11.1503 | Standard 5 | - | 65mm | 140mm | - | - | - | 48mm | - |
| 62.25.0855.575.11.1403 | Standard 5 | - | 17.000 mm | 47.0000 mm | - | - | - | 22.20 mm | - |
| 231.20.1000.013 Type 21/1200.1 | Standard 5 | - | 200mm | 340mm | - | - | - | 112mm | - |
| 231.21.1075.013 Type 21/1200.1 | Standard 5 | - | 45 mm | - | 143.5 mm | - | - | - | - |
| 161.25.0886.890.11.1503 | Standard 5 | - | 12mm | 28mm | - | - | - | 8mm | - |
| 60.20.0414.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0800.013 Type 21/950. | Standard 5 | - | 35mm | 72mm | - | - | - | 27mm | - |
| 62.25.0855.500.11.1503 | Standard 5 | - | 1 Inch | 2.5 Inch | - | - | - | 0.75 Inch | - |
| 61.25.0764.601.21.1503 | Standard 5 | - | 50mm | 80mm | - | - | - | 16mm | - |
| 61.20.0560.101.21.1503 | Standard 5 | 1.9 mm | 35 mm | 62 mm | - | 1.7 mm | - | 14 mm | - |
| 231.20.0700.013 Type 21/850.1 | Standard 5 | - | 200 mm | 270 mm | - | - | - | 170 mm | - |
| 162.25.0886.891.21.1503 | Standard 5 | - | 60mm | 110mm | - | - | - | 22mm | - |
| 3R16-245N1 | Rotek | - | 80 mm | - | - | - | - | 55 mm | - |
61.20.0544.500.01.1503 Standard 5 Slewing Ring Bearings Video
061.20.0544.500.01.1503 thyssenkrupp rothe erde slewing ...
061.20.0544.500.01.1503 thyssenkrupp rothe erde slewing bearing ; Size (mm), 240x360x160 ; Bore Diameter (mm), 240 ; Outer Diameter (mm), 360 ; Width (mm), 160.