| 282.30.1175.013 Type 110/1300.2 Standard 5 Slewing Ring Bearings | Limiting speed:950 r/min; D:680 mm; Calculation factor Y0:2.8; d2 ≈:533 mm; Basic static load rating C0:6950 kN; b:22.3 mm; Basic dynamic load rating C:4065 kN; D1 ≈:617 mm; Calculation factor Y2:4.6; G1:37 mm; Reference speed:560 r/min; Mass bearing + sleeve:225 kg; B:163 mm; d1:440 mm; ra max.:5 mm; Fatigue load limit Pu:465 kN; G:Tr 480x5; Calculation factor Y1:3; Calculation factor e:0.22; |
| 162.16.0450.891.21.1503 Standard 5 Slewing Ring Bearings | Static Load Rating (kN):4.2; Availability:In Stock; SKU:6301vv-nsk; B:12mm; Dynamic Load Rating (kN):9.7; Cage Type:Steel; D:37mm; Limiting Speed Rating (r/min):16000; Fatigue Load Rating (kN):--; Clearance:Standard; Weight:0.02 KGS; Seals or Shields:Non-Contact Seal; d:12mm; Reference Speed Rating (r/min):--; |
| 161.20.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Lubricant:Maintenance free &nd; Da min.:41.3 mm; r1 min.:0.6 mm; r2 min.:0.6 mm; d:25 mm; Mass plain bearing:0.2 kg; Specific dynamic load factor K:300 N/mm²; C:18 mm; B:28 mm; dk:40.7 mm; Da max.:44 mm; Specific static load factor K0:500 N/mm²; ra max.:0.6 mm; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:28.7 mm; D:47 mm; Basic dynamic load rating C:176 kN; Basic static load rating C0:290 kN; |
| 61.20.0744.500.01.1503 Standard 5 Slewing Ring Bearings | D:500mm; Grease Limiting Speed (r/min):500; d:300mm; SKU:24160camk30e4-nsk; Cage Type:Brass; Static Load Rating (kN):5800; Oil Limiting Speed (r/min):670; Dynamic Load Rating (kN):3100; Weight:152.00 KGS; Availability:In Stock; B:200mm; Seals or Shields:Open Type; Clearance:Standard; |
| 60.25.0955.575.11.1403 Standard 5 Slewing Ring Bearings | Cage Type:Brass; Dynamic Load Rating (kN):160; Fatigue Load Rating (kN):20.2; d:60mm; Availability:In Stock; Seals or Shields:Open Type; Static Load Rating (kN):155; SKU:22212-e1a-m-c3-fag; D:110mm; B:28mm; Limiting Speed Rating (r/min):7500; Clearance:C3; Weight:0.02 KGS; Reference Speed Rating (r/min):4550; |
| 162.25.1120.890.11.1503 Standard 5 Slewing Ring Bearings | d:100.000 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Static Radial Load Rating Co:54000 N; D:150.0000 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating Open/Shielded n1:4300 rpm; Accessories:One Shield; B:24.00 mm; Basic Dynamic Radial Load Rating C:63700 N; |
| 162.20.0450.890.11.1503 Standard 5 Slewing Ring Bearings | B:37mm; Clearance:Standard; Seals or Shields:Open Type; d:75mm; D:160mm; Availability:In Stock; Limiting Speed Rating (r/min):5600; Dynamic Load Rating (kN):79.3; Fatigue Load Rating (kN):1.43; Static Load Rating (kN):30; Cage Type:Steel; Reference Speed Rating (r/min):8000; SKU:1315k/w64-skf; Weight:3.55 KGS; |
| 162.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | Taconite seal:TER 45; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:149.1 N·m; R2:21.431 mm; A1:88.9 mm; Ca:42.799 mm; Da:140 mm; J1:53.975 mm; R1:53.181 mm; S:4.763 mm; Housing:FSAF 516; PG:1/8 NPT; H2:31.75 mm; J min.:244.475 mm; P90°:36 kN; End plug (suffix Y):EPR 8; A2:209.55 mm; Max. speed for Taconite seal:1150 r/min; h:31.75 mm; ba:34.131 mm; |
| 282.30.0900.013 Type 110/1100.2 Standard 5 Slewing Ring Bearings | Dynamic Load Rating (kN):37.1; D:90mm; SKU:7011acd/p4adgb-skf; Availability:In Stock; Preload:Medium; B:18mm; Cage Type:Plastic; d:55mm; Clearance:Standard; Fatigue Load Rating (kN):1.32; Oil Limiting Speed (r/min):22000; Grease Limiting Speed (r/min):14000; Static Load Rating (kN):31; Seals or Shields:Open Type; Weight:0.38 KGS; |
| 61.20.0644.500.01.1503 Standard 5 Slewing Ring Bearings | r1 min.:0.6 mm; B:30.15 mm; Sealing solution:Triple-lip seals; α:5 °; M:4 mm; d:34.925 mm; C:26.187 mm; Da min.:47.1 mm; dk:49.2 mm; Design (sliding contact surface combination):Steel/steel; Basic dynamic load rating C:104 kN; D:55.563 mm; Lubricant:Regular relubricatio; ra max.:0.6 mm; Specific static load factor K0:300 N/mm²; b:4.8 mm; Basic static load rating C0:310 kN; Material constant KM:330; |
| 232.21.0775.013 Type 21/850.2 Standard 5 Slewing Ring Bearings | Fatigue load limit Pu:400 kN; Mass roller and cage thrust assembly:7.96 kg; Roller and cage thrust assembly:K 89426 M; Ea:145 mm; Eb:263 mm; Basic dynamic load rating C:1060 kN; d:130 mm; Basic static load rating C0:4500 kN; Reference speed:530 r/min; Dw:28 mm; D:270 mm; Limiting speed:1100 r/min; |
| 231.20.0600.013 Type 21/750.1 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:48800 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:0 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; B:20.00 mm; D:190.0000 mm; Basic Static Radial Load Rating Co:57000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; d:150.000 mm; Accessories:Two Shields; |
| 62.25.1077.890.11.1503 Standard 5 Slewing Ring Bearings | ra max.:2 mm; Da min.:128 mm; Fatigue load limit Pu:96.5 kN; rc max.:0.6 mm; Calculation factor e:0.43; Reference speed:2800 r/min; K:7.5 mm; r5 min.:0.6 mm; Calculation factor Y2:2.3; T:98 mm; Limiting speed:4300 r/min; Ca min.:7 mm; b:10 mm; Basic dynamic load rating C:606 kN; Da max.:140 mm; Basic static load rating C0:850 kN; D:150 mm; r3,4 min.:2 mm; da max.:96 mm; Calculation factor Y1:1.6; |
| 61.20.0544.575.01.1403 Standard 5 Slewing Ring Bearings | d:40 mm; α:6 °; Mass rod end:1.85 kg; r1 min.:0.6 mm; d2 max.:94 mm; Specific dynamic load factor K:150 N/mm²; l2 max.:199 mm; l1 min.:86 mm; Material constant KM:330; l7 min.:46 mm; C1 max.:24 mm; h:150 mm; G:M 39x3; Basic static load rating C0:140 kN; Basic dynamic load rating C:150 kN; B:28 mm; dk:53 mm; |
| No. | Brand | b | d | D | J | f | M | B | U |
| 62.20.0844.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0414.500.01.1503 | Standard 5 | - | 80mm | 110mm | - | - | - | 16mm | - |
| 61.25.0955.500.11.1503 | Standard 5 | - | 60mm | 110mm | - | - | - | 28mm | - |
| 232.20.0600.013 Type 21/750.2 | Standard 5 | - | 60mm | 130mm | - | - | - | 46mm | - |
| 230.21.0875.013 Type 21/950. | Standard 5 | - | 30mm | 72mm | - | - | - | 19mm | - |
| 161.25.0980.890.11.1503 | Standard 5 | - | 35mm | 80mm | - | - | - | 31mm | - |
| 232.21.0775.013 Type 21/850.2 | Standard 5 | - | 130 mm | 270 mm | - | - | - | - | - |
| 232.20.0800.013 Type 21/950.2 | Standard 5 | - | 170mm | 260mm | - | - | - | 90mm | - |
| 61.25.0764.103.11.1504 | Standard 5 | - | 190mm | 320mm | - | - | - | 104mm | - |
| 232.21.0575.013 Type 21/650.2 | Standard 5 | - | 45.000 mm | 85.0000 mm | - | - | - | 19.00 mm | - |
| 230.21.0775.013 Type 21/850. | Standard 5 | - | 60mm | 110mm | - | - | - | 22mm | - |
| 231.20.0600.503 Type 21/750.1 | Standard 5 | - | 40mm | 80mm | - | - | - | 18mm | - |
| 61.25.0980.891.21.1503 | Standard 5 | - | 30mm | 62mm | - | - | - | 23.8mm | - |
| 162.16.0630.890.11.1503 | Standard 5 | - | 60 mm | - | - | - | - | 44 mm | - |
| 60.20.0644.575.01.1403 | Standard 5 | - | 30 mm | - | - | - | - | 22 mm | - |
| 61.25.0980.890.11.1503 | Standard 5 | - | 30 mm | 72 mm | - | - | - | 17 mm | - |
| 162.25.1180.891.21.1503 | Standard 5 | - | 40 mm | - | 101.5 mm | - | - | - | - |
| 162.20.0630.890.11.1503 | Standard 5 | - | 33.338mm | 69.012mm | - | - | - | 19.845mm | - |
| 92.20.1006.990.11.1503 | Standard 5 | - | 40mm | 90mm | - | - | - | 33mm | - |
| 231.21.0975.013 Type 21/1050.1 | Standard 5 | - | - | - | 82.5 mm | - | - | - | - |
| 162.16.0560.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0600.503 Type 21/750.2 | Standard 5 | 8.3 mm | - | 210 mm | - | - | - | - | - |
250.15.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings Video
Rothe Erde Slewing Bearings - Rotek Inc.
006 thyssenkrupp Rothe Erde GmbH 016 Bearing types ... 250.15.0400.013. Type 13/500 ... 13,5. 12. 77. ≤ 0,30. ≤ 0,26 centering spigots are required, these.
250.15.0300.013 Type 13/400 LILY Interchangeable From Standard ...
Type, Ball ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 233 mm ; Outside Diameter Of Outer Ring, 401 mm ; Internal Diameter On Outer Ring (Di) ...
250.15.0400.013 Type 13/500 Slewing Ring Bearings
250.15.0400.013 Type 13/500 Slewing Ring Bearings ; Height Of Overall Bearing Assembly (H), 40 mm ; Weight, 13.1 Kg ; Number Holes In Outer Ring (no), 8 ; Number ...Type: BallWeight: 13.1 Kg
Rothe Erde® Slewing Bearings.
Except for Standard series KD 210, types 13 and 21. Table 1. Service Time in Full Load ... 250.15.0400.013. Typ 13/500. 250.15.0375.013. Typ 13/400 ... 13,5.194 pages
250.15.0400.013 Type 13/500 - Slewing Ring Bearings ...
LYMC bearings are the perfect alternative to the most common and well-known brands.
250.15.0400.013 Type 13/500 - BSPD Bearing Manufacturing
250.15.0400.013 Type 13/500 ; Outline Dimensions and Weight ; Weight(KG), 13.1 ; Racewat diameter(Dl), 421 ; External diameter(Da), 501 ; Internal diameter(Di), 333.Diameter(U): 396Weight(KG): 13.1Diameter(O): 446
250.14.0400.013 Type 13/500 Slewing ring bearings ...
Slewing ring bearings 250.14.0400.013 Type 13/500, 13.1 kg Bearing mass, (333*501*40 mm), 333 mm d (Bore: diameter of the inner ring), 501 mm D (Outside: ...